As suppliers of high-quality spraying equipment, we stock a wide choice of Pumps that are fully certified

Please enquire if you don’t see what you need .

HARDI PUMP 464

General specifications:

  • High capacity six diaphragms positive displacement radial pump.
  • Optimized water flow.
  • Improved diaphragms .
  • Double remote grease zones.
  • New design of diaphragm top locks with integrated lifting hooks.
  • Mud and water covers for protecting the pump heads.
  • Cast connecting rod support ring for improved mechanical lifetime.
  • Self-priming and able to run dry.
  • Can rotate clockwise and counter clockwise.
  • Dry sump to simplify maintenance.
  • No special tools required for servicing.
  • Cast iron crankcase and covers.
  • 2″ suction port and 1.25″ pressure port.
  • Hydraulic drive kit available.

HARDI PUMP 364

General specifications:

  • High capacity six diaphragms positive displacement radial pump.
  • Optimized water flow.
  • Improved diaphragms .
  • Two Non-rotating remote greasing points.
  • New design of diaphragm top locks with integrated lifting hooks.
  • Mud and water covers for protecting the pump heads.
  • Cast connecting rod support ring for improved mechanical lifetime.
  • Self-priming and able to run dry.
  • Can rotate clockwise and counter clockwise.
  • Dry sump to simplify maintenance.
  • No special tools required for servicing.
  • Cast iron crankcase and covers.
  • 1.5″ suction port and 1.25″ pressure port.
  • Hydraulic drive kit available.

HARDI PUMP 1303

General specifications:

  • Three diaphragm positive displacement pump.
  • Base plate incorporated in crankcase.
  • Self-priming.
  • Can be run dry.
  • Can rotate clockwise or anticlockwise.
  • Three grease points for lubrication.
  • Dry sump to simplify maintenance.
  • No special tools needed for maintenance.
  • Polyurethane diaphragms and seals.
  • Stainless steel diaphragm discs and bolts.
  • Cast iron crankcase and covers.
  • 11/4″ suction port, 1″ pressure port.
  • Recommended to use HARDI? suction and pressure dampers.

HARDI PUMP 1203

General specifications:

Two diaphragm positive displacement pump.
• Base plate incorporated in crankcase.
• Self-priming.
• Can be run dry.
• Can rotate clockwise or anticlockwise.

• Dry sump to simplify maintenance.
• No special tools needed for maintenance.
• Polyurethane diaphragms and seals.
• Stainless steel diaphragm discs and bolts.
• Cast iron crankcase and covers.
• 11/4″ suction port, 1″ pressure port.
• Recommended to use HARDI suction and pressure dampers.
• Single grease point for lubrication.

HARDI PUMP 603

General specifications:

  • Compact two diaphragm positive displacement pump.
  • Low power consumption.
  • Self-priming.
  • Can be run dry.
  • Can rotate clockwise or anticlockwise.
  • Single grease point for lubrication.
  • Dry sump to simplify maintenance.
  • No special tools needed for maintenance.
  • Polyurethane diaphragms and seals.
  • Cast iron crankcase and covers.
  • 3/4″ suction port, 3/4″ pressure port.
  • Recommended to use HARDI? suction and pressure dampers

BP 110

General specifications:

  • For weeding treatments and liquid fertilisation with solutions.
  • Suitable for tractor-mounted or wheeled sprayers
  • The parts directly touching the liquid are made of plastic and plastic-coated aluminium, resistant to chemicals used in agriculture.
  • 3-membrane pump made of NBR and Desmopan®
  • Technopolymer heads and manifolds

Comet APS61

General specifications:

  • Semi-Hydraulic, Three Diaphragm Pump
  • Fluid Transfer Applications Up To 725 PSI and 18.8 GPM
  • Internally Manifolded and Features Anodized Aluminum Construction for Corrosion Resistance
  • Connects to Shafts, Fan Assemblies, Pulleys & Gearboxes
  • Compatible Pumping Chemicals Such As Herbicides, Pesticides, and Others
  • Self-Priming, Large Capacity Oil Bath Crankcase, Mounting Rails with Standard Pattern
  • Operates At a Maximum of 550 RPMs and 9.1 HP

Comet AP41

General specifications:

  • Semi-Hydraulic, Three Diaphragm Pump
  • Fluid Transfer Applications up to 580 PSI & 10.8 GPM
  • Internally Manifolded
  • Anodized Aluminum Construction for Corrosion Resistance
  • Connects to Shafts, Fan Assemblies, Pulleys, and Gearboxes
  • Compatible Pumping Chemicals
  • Self-Priming, Large Capacity Oil Bath Crankcase, Mounting Rails, and Can Be Run Dry
  • Operates Maximum of 550 RPMs and 4.1 HP

Comet IDS960

General specifications:

  • Semi-Hydraulic, Four Diaphragm Pump
  • Tackles Fluid Transfer Applications up to 725 PSI and 24.7 GPM
  • Features Brass Heads and Brass External Manifolds to Provide Corrosion Resistance
  • Perfect for High Pressure Agricultural and Horticultural Applications Such as Orchards, Vegetables, Trees, Vineyard Spraying, and More
  • Easily Connects to Tractor PTOs with the 6 Spline PTO Shaft (1 3/8″) Setup
  • Self-Priming, Large Capacity Oil Bath Crankcase, Mounting Rails and Can be Run Dry
  • Operates at Maximum of 550 RPMs and 11.5 HP

Comet APS96

General specifications:

  • Semi-Hydraulic, Four Diaphragm Pump
  • Tackles Fluid Transfer Applications Up To 725 PSI and 24.8 GPM
  • Internally Manifolded and Features Anodized Aluminum Construction For Corrosion Resistance
  • Easily Connects to Shafts, Fan Assemblies, Pulleys, and Gearboxes
  • Perfect for Agricultural Spraying, Lawn Care, Pest Control, Weed Control, Tree Spraying, and More
  • Operates at a Maximum of 550 RPMs and 11.7 HP

AR1064 4- diaphragm

General specifications:

  • Max flow: 28.7 gpm
  • Max pressure: 725 psi
  • Shaft: Flange for gearbox or shaft kit on one end and 1-3/8″ 6-spline male PTO on the other
  • Port sizes: 1-1/2″ HB inlet, 3/4″ NPT outlet
  • Pump shaft rotation: CW and CCW
  • Diaphragms: 4, semi-hydraulic, BlueFlex® material
  • Housing: Anodized aluminum
  • Recommended control unit: VDR50
  • Recommended gearbox: AR1639 with 1″ hollow shaft for mounting on 8-13 hp engines
  • Max fluid temperature: 140°F
  • Weight: 51.8 lbs

Comet IDS1000

General specifications:

  • Semi-Hydraulic, Three Diaphragm Pump
  • Tackles a Wide Range of Fluid Transfer Applications up to 725 PSI and 26.7 GPM
  • Features Brass Heads and Brass External Manifolds to Provide Corrosion Resistance
  • Perfect for High Pressure Agricultural and Horticultural Applications Such as Orchards, Vegetables, Tress, Vineyards, and More
  • Connects to Tractor PTOs with the 6 Spline PTO Shaft (1 3/8″) Setup
  • Features a 1″ By-Pass, Self-Priming, Large Capacity Oil Bath Crankcase, Pressure Accumulator, Safety Valve Mounting Rails with Standard Pattern
  • Operates at Maximum of 550 RPMs and 12.5 HP

Comet YA75

General specifications:

  • Configuration: 3 ceramic plungers.
  • Parts in contact with spray liquid: anodized aluminium.
  • On request: PTO protection.
  • Double seal with drip recovery.
  • Patented piston oil guard anti-wear system.

Comet YA 130

General specifications:

  • Configuration: 6 ceramic plungers.
  • Parts in contact with spray liquid: anodized aluminium.
  • On request: PTO protection.
  • Double seal with drip recovery.
  • Patented piston oil guard anti-wear system.